Description
The MS 2000 indexer is the big brother to the MS1000. Like the MS 1000, the MS 2000 is a center driven, high precision indexing machine designed to be low cost without sacrificing flexibility. It is ideally suited for higher inertia applications that require superior accuracy, high torque and configurability. The MS 2000 is the perfect replacement for mechanical indexers. With higher performance, flexibility, and lower installed cost the MS 2000 eliminates the limitations associated with cam driven indexers. It comes standard with a pendant (HMI) control and it can be easily configured right from the keypad. No programming experience is required because there isn’t any programming. Changes are made on the keypad in plain English.

The MS 2000 is available in eight sizes (MS 2000A thru MS 2000H), flange, pedestal or machine base mount. All models are supplied completely assembled, wired and tested.

Features

• Quick, simple startup
• Low cost
• High precision
• Simple to configure and reconfigure - no programming required
• Easy to integrate with industry standard controllers
• Can be used as a stand alone machine
• 24 volt DC inputs and outputs
• Keypad configurable user output(s)
• Home position indication - no home switch required
• Home adjust feature provides fine tuning of the home position
• Completely assembled, wired and tested
• Can be used with standard network communication protocols
• Several drive voltages available
• Adjustable electronic torque limit

Mechanical Specifications

Model Number	Maximum Moment Load	Maximum Axial Load	Output Torque	Repeatability
	in.-lb.	lb.	in.-lb.	arc seconds
MS 2000 A	1,700	325	600	+/- 15
MS 2000 B	7,600	875	1,450	+/- 15
MS 2000 C	14,750	1,150	3,625	+/- 15
MS 2000 D	18,750	1,750	6,875	+/- 15
MS 2000 E	25,500	2,400	9,500	+/- 15
MS 2000 F	34,000	3,275	13,750	+/- 15
MS 2000 G	61,250	4,375	27,750	+/- 15
MS 2000 H	76,750	5,500	38,950	+/- 15

Electrical Specifications

• Controller/drive input power: 230 VAC, 460 VAC single and 3 phase, other voltages available
• Electronic Torque Control, 0-100% of full torque

I/O

• Inputs: 24 volt DC sourcing @ < 2ma
• Outputs: 24 volt DC < 200 ma total when using internal power supply
• User Outputs - 1 available, configured from pendant

HMI (Pendant Control)

• Full function all parameters configurable from the touch screen

Specifications
Size	6.75" x 4.75" x 1.50"
LCD	Green, Red, Orange
Backlight	Not required
Communication	RS232C
Touch Key Res.	Free, Analog
Power Required	Supplied by controller
Protection (Front)	IP65
Compliance	UL, cUL, CE

Options

• Dial plates - small to large diameters - Aluminum, Steel, and other materials available
• Rotary Unions - mounted and tested
• Electrical Slip Rings - mounted and tested
• Custom bases
• 8 drive sizes to match your load requirements
• Fieldbus communications available: Modbus, Ethernet, DeviceNet, Interbus, CANopen, PROFIBUS
• Additional I/O

Drawings

Mechanical
MS 2000 A	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 B	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 C	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 D	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 E	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 F	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 G	Native Solidworks	IGES	Step	.DXF	PDF
MS 2000 H	Native Solidworks	IGES	Step	.DXF	PDF

[ top ]

---

Copyright © 2006 Centricity. All rights reserved.